20-inch Multi-Purpose Solar Attic Fan has the following features:
Photovoltaic Module:
- Hi-Powered configuration custom engineered exclusively for the Fan-Attic application.
- Module sealed to the top side of a 24-inch diameter ABS UV protected shroud cover using Vulkem 116 Polyurethane Sealant.
- 35 Multi/Monocrystaline Solar Cells.
- A Manufactured to ISO 9001 standards.
Output Cable:
- A Two(2)-18awg. lead wires from the junction box on the underside of the PV module are routed down the outer side through a rubber grommet to the inside of the lower section.
- 1/8th-inch nylon tie wraps secure wires to the W Brackets and attach to the positive and negative motor terminals by two(2)- .25-inch female wire connectors.
Substrate:
Tedlar
Overlay:
- Encapsulation between hi-transmission tempered glass and the EVA (TPT-TP) guarantees the solar module excellent durability under harsh outdoor conditions.
- Manufactured to DIN / EN ISO 2001 2000 and ISO 9001 2000 and ISO ITSI 6949 / 2002.
- Certification by TUV, Rheinland.
Shroud Cover:
- UV stabilized unbreakable hi-tech vacuum formed co-polymer composite.
- Resists dents, deformation, rust, corrosion, and heat transfer.
Brackets:
- Shroud support comes from four(4)ga. Cover Brackets and fastened by four(4) no.10 x 3/4-inch self-tapping screws to the shroud.
- 16ga. Corrosion Resistant Steel
Roof Flashing/Base:
24-inch square horizontal section of 26ga. Zincalume alloy-coated steel.
Steel:
The top edge of the vertical base houses a galvanized mesh screen.
225 galvanized mesh wire Fan Motor/Blade Assembly:
38 Volt DC Type Motor and one (1) piece triple blade are held by two(2)-W Brackets.
Features:
- This solar powered attic fan uses no Electricity.
- Lowers your energy consumption and cost.
- Cools your attic in the summer.
- Removes moisture in the winter.
- Whisper quite technology.
- Totally weather proof.
- Quick and Easy Installation.
- Easy Maintenance.
- Solar attic Fan Size: 20-inch diameter.
- Panel Wattage: 30Watts.
- CFM: 2400 plus.
- Ideal for 1500 - 3000 sq. ft. attic space.
Photovoltaic Module Specs:
- Hi-Powered configuration custom engineered exclusively for the Fan-Attic application.
- Module sealed to the top side of a 24-inch diameter.
- ABS UV protected shroud cover using Vulkem 116 Polyurethane Sealant.
- 35 Multi/Monocrystaline Solar Cells.
- Manufactured to ISO 9001 standards.